Panning with the mouse

Pan and Zoom.

Alternately, lift each foot off the floor the minimum necessary amount until no additional foot movement is obtained.

The slope.

Well it's flat.

That's a strange angle.

2.21.3. angular displacement.

2 Tilt angle, height difference with a seat mounting, surface texture, etc.

Please enter a valid float value.

Please enter a valid float value!

In the case of belts fitted with an automatically locking retractor and of static belts, the following number of samples shall be subjected to the test prescribed in paragraph 1.6.2. above

2.1.2. the actual torso angle and the design torso angle and their relationship.

2.1.2. the actual torso angle and the design torso angle and their relationship.

2.1.2. the actual torso angle and the design torso angle and their relationship.

If the feet change position, they should be allowed to remain in that attitude for the moment.

Design torso angle

The slope definitely isn't 0 there, because it wasn't one of the critical points.

You can see the little BB in the box is my tilt sensor.

Cameras

digiKam use root album paths to store your photo albums created in My Albums view from left side bar. Below, please select which folder you would like digiKam to use as first root album path from your local file system. Note you can set other root album paths later using digiKam settings panel. Removable medias and shared files system are supported.

THE CHAMBERS

CCTV?

The forward displacement of the manikin may be controlled with regard to paragraph 6.4.1.3.2. of this Regulation (or 6.4.1.4. where applicable) during a test performed with conditioning according to paragraph 1.6.1. of this annex by means of a simplified adapted method.

The actual torso angle corresponds theoretically to the design torso angle (for tolerances see paragraph 3.2.2. below).

Actual torso angle means the angle measured between a vertical line through the H point and the torso line using the back angle quadrant on the 3 D H machine. The actual torso angle corresponds theoretically to the design torso angle (for tolerances, see paragraph 3.2.2. below).

The sky vector may not be a null vector.

Because your slope goes vertical.

The Camera View

The camera view

Auto Detect Camera

Camera name

Camera and Scanner

Camera Configuration

Camera Title

The model of the camera

Camera Folders

Camera type

Control points

Camera Views

Supported Cameras

Camera Manufacturer

Camera Model

Camera Profile

(a) The Chambers

GAS CHAMBERS