This matrix is symmetric and thus has 10 independent components.

More formally, the electrostriction coefficient is a fourth rank tensor (formula_1), relating second order strain (formula_2) and first order polarization tensors (formula_3, formula_4).

I find that the sum of the voltages, VCA plus VAB plus VBC, is zero.

The gates or bases of the power transistors are tied via a resistor to one of the supply voltages.

Pressure test of pipelines carried out with water, used also to remove local tensions and oval shape of the cross section.

The components formula_2 of the stress tensor depend on the orientation of the coordinate system at the point under consideration.

In order to avoid concentrations of stresses in the overlay lamination, the applied tapper shall not be steeper than 1 6.

(h) Tensor development of methods of ascertaining the dynamic characteristics of the ISS that are necessary to increase the precision of its orientation, prediction of the functioning of the on board systems and proper conduct of scientific experiments

The range of voltages where the mirror works is called the compliance range and the voltage marking the boundary between good and bad behavior is called the compliance voltage.

List conditions such as heat, pressure, shock, static discharge, vibrations or other physical stresses that might result in a hazardous situation.

A curvature tensor must also satisfy the Bianchi identity, meaning that it is in the kernel of the linear map formula_22The space in S 2Λ2 V is the space of algebraic curvature tensors.

Indeed, Chinese scientists blamed the massive 2008 earthquake that struck the Tibetan plateau s eastern rim, killing 87,000 people, on the newly constructed Zipingpu Dam, located next to a seismic fault. The weight of the water impounded in the dam s massive reservoir was said to have triggered severe tectonic stresses, or what scientists call reservoir triggered seismicity.

The weight of the water impounded in the dam s massive reservoir was said to have triggered severe tectonic stresses, or what scientists call reservoir triggered seismicity.

3.4. In the case of lamps with non replaceable light sources or light source module(s), the lamp shall bear the marking of rated voltage or the range of voltage, and the rated wattage.

4.1.3. in the case of lamps with non replaceable light sources or light source module(s), the marking of rated voltage or the range of voltages, and the rated wattage.

3.4. in the case of lamps with non replaceable light sources or light source module(s), bear the marking of rated voltage or the range of voltages, and the rated wattage.

4.5. in the case of lamps with non replaceable light sources or light source module(s), shall bear the marking of rated voltage or the range of voltages, and the rated wattage.

So let me put this in numbers and ask you the challenging question of what's the probability of a raise given that I'm happy and it's sunny?

And I can focus on this guy and say, Maxwell's equations, this thing with squiggles and dels and all that stuff, can be simplified to the sum of the voltages across a set of elements in a loop in a circuit is zero.

The new proposal contained in this document was discussed by the working group on tanks but could not be supported since pressure in the liquid caused by the dynamic stresses (g values) had not been taken into account.

At the Veterans Today website, a retired officer of the United States Coast Guard, Tom Barnes, says the news channel is playing up the stereotype to create us versus them tensions

All measurements on lamps equipped with non replaceable light sources (filament lamps and other) shall be made at 6.75 V, 13.5 V or 28.0 V, or at a voltage as specified by the applicant with respect to any other vehicle voltage system.