Translation of "iron mold" to Russian language:


  Examples (External sources, not reviewed)

Mold
greece. kgm
Mold varieties
Количество штаммов
Dad, is that mold?
Надеяться не стоит?
Can't break the mold.
Этого нельзя изменить.
Tom is allergic to mold.
У Тома аллергия на плесень.
Chisinau, 1980 (on the mold.
Кишинев, 1980 (на молд.
This old book is covered with mold.
Старая книга покрыта плесенью.
Mold maybe fifteen different types of bathrooms.
Отлить, скажем, пятнадцать видов ванных комнат.
We're poured out of the same mold.
Ты и Я стоим друг друга.
John F. Kennedy was in the Metternich mold.
Джон Ф. Кеннеди разделял суждения Меттерниха.
Once the casting material has acquired the shape of the mold and cured fully, the cast is carefully removed from the mold.
После того как литейный материал приобрёл форму пресс формы и затвердел в полном объёме, его осторожно удаляют из формы.
And I kind of broke the mold with Sherman.
Но я некоторым образом разбил стереотипы с Шерманом.
Dr. Harris So you're kind of creating a mold.
(Ж) Итак, мы создали что то вроде формы.
iron.
R3m.
Iron
Железо
The mold itself may be repaired, altered, or added to.
Форма сама по себе может быть изменена или модифицирована.
1 mole of iron, let's say iron 56 there's obviously many isotopes or iron let's say we're dealing with iron 56.
1 моль железа, скажем, железа 56. Очевидно существует много изотопов железа. Предположим, мы имеем дело с железом 56.
Build it up with iron and steel,Iron and steel, iron and steel,Build it up with iron and steel,My fair lady.
Build it up with iron and steel,Iron and steel, iron and steel,Build it up with iron and steel,My fair lady.
Cast iron is an alloy of iron and carbon.
Чугун сплав железа и и углерода.
I cannot iron my clothes. I have no iron.
Я не могу погладить свою одежду. У меня нет утюга.
Shall iron break the northern iron and the steel?
Может ли железо сокрушить железо северное и медь?
Iron girder
Подпись
Iron Seal
Термотрансфер
Iron On
Металлизированный
Iron ferrite.
Железен ферит.
To succeed, the post 2015 agenda must break the original mold.
Для успешности план действий на период с 2015 г. должен быть новаторским.
Only a new approach could break the mold of conventional wisdom.
Только новый подход смог сломать форму традиционного благоразумия.
Benzoic acid inhibits the growth of mold, yeast and some bacteria.
Она подавляет рост плесени, дрожжей и некоторых бактерий.
Large deposits of iron are found in banded iron formations.
Известно большое число руд и минералов, содержащих железо.
The UV light reduces the iron(III) to iron(II).
УФ лучи восстанавливают железо Fe (III) до Fe (II).
Iron Maiden's eponymous 1980 release, Iron Maiden , debuted at No.
На тот момент звучание Iron Maiden было намного более тяжелым по сравнению с другими исполнителями.
Iron oxides are chemical compounds composed of iron and oxygen.
Окси ды желе за соединения железа с кислородом.
Iron sharpens iron so a man sharpens his friend's countenance.
Железо железо острит, и человек изощряет взгляд друга своего.
I don t try to fit any mold I don t try to please.
Я не пытаюсь вписаться в форму я не пытаюсь угодить .
Forgeries were painted over it, and it suffered very badly from mold.
Листы книги были покрыты поддельными изображениями, и она сильно пострадала от плесени.
With concrete you get sort of elasticity and you can mold space.
При формировании бетон гибок, поэтому вы можете изогнуть поверхность, ведь он жидкий.
Iron sulfate may refer to Ferrous sulfate, Iron(II) sulfate, FeSO4 Ferric sulfate, Iron(III) sulfate, Fe2(SO4)3
Сульфат железа(II) соединение с формулой FeSO4 Сульфат железа(III) соединение с формулой Fe2(SO4)3
Can one break iron, even iron from the north, and brass?
Может ли железо сокрушить железо северное и медь?
Iron is hard.
Железо твёрдое.
Iron is hard.
Железо твёрдое.
The iron exploded.
Утюг взорвался.
Magnets attract iron.
Магниты притягивают железо.
Please iron this.
Погладьте это, пожалуйста.
Please iron this.
Погладь это, пожалуйста.
and Iron Maiden.
и Iron Maiden.

 

Related searches : Constant Mold - Mold Temperature - Mold Release - Mold Insert - Slime Mold - Plastic Mold - Mold Filling - Mold Shrinkage - Mold Steel - Mold Cost - Mold Maker - Mold Plate