One will be the tricuspid valve and the other the mitral valve.

HP pressostat

Front Valve

This is what happens, that valve closes down.

Then these valves are going to close down.

So open the cold water supply, then the Diverter Valve and the lower valve of the unit.

Manual shutt off valve

To let you tell your story and risk setting mankind at each other's throats again.

The gas valve's stuck, I think.

(F) Pressure relief valve, optional

And this is how you make a valve.

First, you have to close the Diverter Valve.

Up here you have the pulmonary valve.

Here you've got the aortic valve.

Call it Pulmonary valve.

So this valve is called the Mitral valve.

And then the final valve, I need to find a nice spot to write it maybe to right here, this final valve that passes through is called the Aortic valve.

There flap grave, reincarnation has

Next , you connect the Diverter Valve to your faucet.

Here you have our tricuspid valve. And I'm gonna label it just as 'T'

So this valve is called the Tricuspid valve.

It is the safety valve for peace.

And it passed through the valve here.

This is actually a heart valve, which we engineered.

It's gonna go back perhaps through the mitral valve, it can go there, or it might go through the tricuspid valve.

The Schrader valve (also called American valve) is a type of pneumatic tire valve used on virtually every motor vehicle in the world today.

The valve plays an important role in reducing water loss and preventing drowning.

The pulmonic valve separates the right ventricle from the pulmonary artery.

I welded the breech, but the valve is still gaping.

Call me when you fall closing.

The mitral valve is positioned in the heart's left side between the left atrium and the left ventricle, and the aortic valve separates the left ventricle from the aorta.

If the exchange rate is irrevocably fixed, that safety valve disappears.

Another path is to, and through, the main oxidizer valve and enters the main combustion chamber.

Well, blood leaves the right ventricle, goes through a valve and after, on the other side you've got, this area right here.

A muscular valve regulates the process of opening and closing the entrance of the lung.

Both the Schrader and the Presta types are good at sealing high pressures.

(J) Pressure transducer or pressure relief valve transducer on tee

Open the air inlet valve to supply compressed air to the machine

Now make sure your valve is open when you put the assembled filter back into your HomePure unit.

Such a rubber washer sealing type cap also helps prevent air from escaping from a slightly leaking valve.

This would basically start flipping back and forth, it would flip this way and this way.

And it's hard to show kind of flap coming out of juby you can imagine it.

A solenoid valve has two main parts the solenoid and the valve.

Remove the valve insert and wait until the tyre deflates completely.

Now, in case it's difficult to remove the filter adapter, just open and close the valve a few times.